Product Details
X100 air compressor comes with a 1.5 ft. stainless steel braided leader hose with 1/4” NPT swivel male fitting hose end and rubber isolated mounting feet as well as insulated electric terminals.
Specifications:
Duty cycle: 15% @ 100 psi
Flow rate: 1.34 cfm @ 0 psi
Max working pressure: 130 psi
Intermittent pressure: 245 psi
Volt: 12v
Amp: 16a
Ingress protection rating: ip54
Cylinder: Φ30mm
Accessories:
Mounting hardware
Vibration isolator
Remote mount air filter assembly
Stainless steel braided leader hose
Check valve
Performance Data |
PSI |
CFM |
A |
BAR |
LPM |
A |
0 |
1.34 |
8.9 |
0 |
38 |
8.9 |
10 |
1.13 |
10.9 |
1 |
30 |
11.5 |
20 |
0.99 |
12.5 |
2 |
26.9 |
13.6 |
30 |
0.95 |
13.6 |
3 |
26.2 |
14.6 |
40 |
0.94 |
14.5 |
4 |
24.5 |
15.4 |
50 |
0.9 |
15.2 |
5 |
21.8 |
15.9 |
60 |
0.81 |
15.6 |
6 |
21.2 |
16 |
70 |
0.78 |
15.8 |
7 |
19.8 |
16.2 |
80 |
0.76 |
16 |
8 |
17.6 |
16.2 |
90 |
0.74 |
16.2 |
9 |
16.4 |
15.9 |
100 |
0.71 |
16.2 |
10 |
14.3 |
15 |
110 |
0.65 |
16.2 |
|
120 |
0.6 |
16.1 |
|
130 |
0.58 |
15.9 |
|
140 |
0.55 |
15.2 |
|
150 |
0.46 |
14.8 |
*Supply Voltage: 13.8 Volts |
RECOMMENDED COMPONENT |
0.5 Gallon Tank |
1.0 Gallon Tank |
12V Relay |
Pressure Switches |
Features:
· IP 54 Rated
· Gearless, direct-driven electric motors
· Oil-less design requires no maintenance (besides filter inspection/replacement)
· High performance and highly reinforced PTFE piston ring
· Anodized piston cylinder for increased wear protection
· Precision, high speed, durable bearings for increased piston & motor life
· Sealed motor housing for moisture resistance
· Environmental seals where electrical connections enter motor housing
· Efficient, oversized heat sink head assembly for increased heat dissipation, duty cycle & performance
· High performance check valve to eliminate restart pressure on head and piston
· Direct or remote mount option air filter assembly
· Replacement air filter elements (filtration to 10 microns)
· Stainless steel braided leader hose (PTFE lined where applicable)
· Heavy duty mounting feet (omega and standard styles, as applicable)
· Reinforced vibration isolators for safe & quiet operation
· Mounting hardware (bolts, washers, locking washers, nuts)
· Thermal Overload Protection (T.O.P. equipped compressors only) to protect compressor from overheating during normal operational duty cycle
· Maximum operating temperature of 158° F
· Minimum operating temperature of -40° F (unless otherwise noted)
· Wire terminal ends to simplify installation (ring ground terminal, spade positive lead terminal)
http://www.airsuspensionsupply.com/